Новий Fliegl трал напівпричіп SES 210 Schatzträger für LKW Transport
- 07819 Triptis
Коробка передач та трансмісія |
|
|---|---|
| Деталі коробки передач | Boîte automatique |
Зауваження |
|---|
|
Localisation :
• Allemagne Triptis Carrosserie : • 9,93 m × 2,54 m × 0,85 m Description: Low loader trailer Functionality: fully functional Rental: is possible Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Note: Trailer may only be operated with towing vehicles providing full ABS functionality Farbe: original Achsenkonfiguration: 1 axle Customized transport solution *(Vehicle shown for illustration only. Production and equipment according to customer requirements.)* # Low Loader Semi-Trailer Chassis Nsboi Ri Hkoz Nnhhujwk Heavy-duty welded steel construction with replaceable 2" kingpin. Low bed sloping from the wheel area to the gooseneck with approx. 210 mm loading height. Rear section sloping towards the axle area. Full-width rear ramp support for aluminium loading ramps Wheel chocks with holders. Aluminium side underrun protection. Removable galvanized steel wheel covers. 10 t rear towing eye Spare wheel with holder mounted externally at the front on the headboard/toolbox Lockable steel toolbox mounted crosswise on the front gooseneck (approx. L 2,400 × W 400 × H 600 mm) 24 V electric winch with 8,165 kg pulling capacity mounted on the gooseneck behind the toolbox. Wireless remote control 35 m steel cable (approx. Ø10 mm) roller fairlead and two removable guide rollers on the gooseneck and rear loading slope. NATO socket on front connection panel 1 pair of recessed wheel wells starting approx. 700 mm behind the gooseneck open towards the outside. Main frame protrudes approx. 145 mm 4 pairs of mounting positions for wheel chocks (Fliegl standard) removable wheel chocks included For transporting tractor units front wheel well spacer blocks (approx. 50 mm high) included # Lashing Equipment 2 pairs of 2.5 t lashing rings on the gooseneck 7 pairs of recessed 10 t lashing mushrooms in the outer frame (top and side) 4 pairs of recessed 10 t lashing rings in the main longitudinal beams 1 central rear screw-type lashing point 6.7 t (JDT) 1 additional front folding lashing ring in the low bed 10 t # Axle + Suspension SAF drum brake axle Air suspension with raise/lower valve # Wheels and Tyres 235/75 R17.5 tyres from leading manufacturers Twin steel wheels factory silver finish # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings at front Electronic Braking System (EBS) with front EBS socket # Electrical System 24 V electrical system LED multi-chamber rear lights Yellow LED side marker lights LED number plate lighting LED front position lights LED rear outline marker lights (white/red) 2 × 7-pin and 1 × 15-pin front sockets LED rotating beacon with holder activated via parking lights Additional LED work light at rear activated via reverse gear # Floor Steel chequer plate on gooseneck Perforated steel low-loader deck with chequer plate in wheel well area Removable steel covers above wheel arches Perforated steel rear loading slope # Side Walls 400 mm aluminium side boards on the gooseneck removable approx. 2,500 mm long 400 mm removable aluminium rear board on the gooseneck # Loading Ramps Pair of aluminium loading ramps max. capacity 12,000 kg per pair approx. 3,400 × 320 mm Rear ramp storage compartment between the longitudinal beams # Registration / Marking Prepared for German registration Single-line number plate holder ECE R48 reflective contour markings (white sides red rear) |
|
Переглянути все
|
Зауваження |
|---|
|
Localisation : • Allemagne Triptis Carrosserie : • 9,93 m × 2,54 m × 0,85 m Description: Low loader trailer Functionality: fully functional Rental: is possible Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Note: Trailer may only be operated with towing vehicles providing full ABS functionality Farbe: original Achsenkonfiguration: 1 axle Customized transport solution *(Vehicle shown for illustration only. Production and equipment according to customer requirements.)* # Low Loader Semi-Trailer Chassis Nsboi Ri Hkoz Nnhhujwk Heavy-duty welded steel construction with replaceable 2" kingpin. Low bed sloping from the wheel area to the gooseneck with approx. 210 mm loading height. Rear section sloping towards the axle area. Full-width rear ramp support for aluminium loading ramps Wheel chocks with holders. Aluminium side underrun protection. Removable galvanized steel wheel covers. 10 t rear towing eye Spare wheel with holder mounted externally at the front on the headboard/toolbox Lockable steel toolbox mounted crosswise on the front gooseneck (approx. L 2,400 × W 400 × H 600 mm) 24 V electric winch with 8,165 kg pulling capacity mounted on the gooseneck behind the toolbox. Wireless remote control 35 m steel cable (approx. Ø10 mm) roller fairlead and two removable guide rollers on the gooseneck and rear loading slope. NATO socket on front connection panel 1 pair of recessed wheel wells starting approx. 700 mm behind the gooseneck open towards the outside. Main frame protrudes approx. 145 mm 4 pairs of mounting positions for wheel chocks (Fliegl standard) removable wheel chocks included For transporting tractor units front wheel well spacer blocks (approx. 50 mm high) included # Lashing Equipment 2 pairs of 2.5 t lashing rings on the gooseneck 7 pairs of recessed 10 t lashing mushrooms in the outer frame (top and side) 4 pairs of recessed 10 t lashing rings in the main longitudinal beams 1 central rear screw-type lashing point 6.7 t (JDT) 1 additional front folding lashing ring in the low bed 10 t # Axle + Suspension SAF drum brake axle Air suspension with raise/lower valve # Wheels and Tyres 235/75 R17.5 tyres from leading manufacturers Twin steel wheels factory silver finish # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings at front Electronic Braking System (EBS) with front EBS socket # Electrical System 24 V electrical system LED multi-chamber rear lights Yellow LED side marker lights LED number plate lighting LED front position lights LED rear outline marker lights (white/red) 2 × 7-pin and 1 × 15-pin front sockets LED rotating beacon with holder activated via parking lights Additional LED work light at rear activated via reverse gear # Floor Steel chequer plate on gooseneck Perforated steel low-loader deck with chequer plate in wheel well area Removable steel covers above wheel arches Perforated steel rear loading slope # Side Walls 400 mm aluminium side boards on the gooseneck removable approx. 2,500 mm long 400 mm removable aluminium rear board on the gooseneck # Loading Ramps Pair of aluminium loading ramps max. capacity 12,000 kg per pair approx. 3,400 × 320 mm Rear ramp storage compartment between the longitudinal beams # Registration / Marking Prepared for German registration Single-line number plate holder ECE R48 reflective contour markings (white sides red rear) |
Коробка передач та трансмісія |
|
|---|---|
| Деталі коробки передач | Boîte automatique |
Зауваження |
|---|
|
Localisation :
• Allemagne Triptis Carrosserie : • 9,93 m × 2,54 m × 0,85 m Description: Low loader trailer Functionality: fully functional Rental: is possible Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Note: Trailer may only be operated with towing vehicles providing full ABS functionality Farbe: original Achsenkonfiguration: 1 axle Customized transport solution *(Vehicle shown for illustration only. Production and equipment according to customer requirements.)* # Low Loader Semi-Trailer Chassis Nsboi Ri Hkoz Nnhhujwk Heavy-duty welded steel construction with replaceable 2" kingpin. Low bed sloping from the wheel area to the gooseneck with approx. 210 mm loading height. Rear section sloping towards the axle area. Full-width rear ramp support for aluminium loading ramps Wheel chocks with holders. Aluminium side underrun protection. Removable galvanized steel wheel covers. 10 t rear towing eye Spare wheel with holder mounted externally at the front on the headboard/toolbox Lockable steel toolbox mounted crosswise on the front gooseneck (approx. L 2,400 × W 400 × H 600 mm) 24 V electric winch with 8,165 kg pulling capacity mounted on the gooseneck behind the toolbox. Wireless remote control 35 m steel cable (approx. Ø10 mm) roller fairlead and two removable guide rollers on the gooseneck and rear loading slope. NATO socket on front connection panel 1 pair of recessed wheel wells starting approx. 700 mm behind the gooseneck open towards the outside. Main frame protrudes approx. 145 mm 4 pairs of mounting positions for wheel chocks (Fliegl standard) removable wheel chocks included For transporting tractor units front wheel well spacer blocks (approx. 50 mm high) included # Lashing Equipment 2 pairs of 2.5 t lashing rings on the gooseneck 7 pairs of recessed 10 t lashing mushrooms in the outer frame (top and side) 4 pairs of recessed 10 t lashing rings in the main longitudinal beams 1 central rear screw-type lashing point 6.7 t (JDT) 1 additional front folding lashing ring in the low bed 10 t # Axle + Suspension SAF drum brake axle Air suspension with raise/lower valve # Wheels and Tyres 235/75 R17.5 tyres from leading manufacturers Twin steel wheels factory silver finish # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings at front Electronic Braking System (EBS) with front EBS socket # Electrical System 24 V electrical system LED multi-chamber rear lights Yellow LED side marker lights LED number plate lighting LED front position lights LED rear outline marker lights (white/red) 2 × 7-pin and 1 × 15-pin front sockets LED rotating beacon with holder activated via parking lights Additional LED work light at rear activated via reverse gear # Floor Steel chequer plate on gooseneck Perforated steel low-loader deck with chequer plate in wheel well area Removable steel covers above wheel arches Perforated steel rear loading slope # Side Walls 400 mm aluminium side boards on the gooseneck removable approx. 2,500 mm long 400 mm removable aluminium rear board on the gooseneck # Loading Ramps Pair of aluminium loading ramps max. capacity 12,000 kg per pair approx. 3,400 × 320 mm Rear ramp storage compartment between the longitudinal beams # Registration / Marking Prepared for German registration Single-line number plate holder ECE R48 reflective contour markings (white sides red rear) |
|
Переглянути все
|
Зауваження |
|---|
|
Localisation : • Allemagne Triptis Carrosserie : • 9,93 m × 2,54 m × 0,85 m Description: Low loader trailer Functionality: fully functional Rental: is possible Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Note: Trailer may only be operated with towing vehicles providing full ABS functionality Farbe: original Achsenkonfiguration: 1 axle Customized transport solution *(Vehicle shown for illustration only. Production and equipment according to customer requirements.)* # Low Loader Semi-Trailer Chassis Nsboi Ri Hkoz Nnhhujwk Heavy-duty welded steel construction with replaceable 2" kingpin. Low bed sloping from the wheel area to the gooseneck with approx. 210 mm loading height. Rear section sloping towards the axle area. Full-width rear ramp support for aluminium loading ramps Wheel chocks with holders. Aluminium side underrun protection. Removable galvanized steel wheel covers. 10 t rear towing eye Spare wheel with holder mounted externally at the front on the headboard/toolbox Lockable steel toolbox mounted crosswise on the front gooseneck (approx. L 2,400 × W 400 × H 600 mm) 24 V electric winch with 8,165 kg pulling capacity mounted on the gooseneck behind the toolbox. Wireless remote control 35 m steel cable (approx. Ø10 mm) roller fairlead and two removable guide rollers on the gooseneck and rear loading slope. NATO socket on front connection panel 1 pair of recessed wheel wells starting approx. 700 mm behind the gooseneck open towards the outside. Main frame protrudes approx. 145 mm 4 pairs of mounting positions for wheel chocks (Fliegl standard) removable wheel chocks included For transporting tractor units front wheel well spacer blocks (approx. 50 mm high) included # Lashing Equipment 2 pairs of 2.5 t lashing rings on the gooseneck 7 pairs of recessed 10 t lashing mushrooms in the outer frame (top and side) 4 pairs of recessed 10 t lashing rings in the main longitudinal beams 1 central rear screw-type lashing point 6.7 t (JDT) 1 additional front folding lashing ring in the low bed 10 t # Axle + Suspension SAF drum brake axle Air suspension with raise/lower valve # Wheels and Tyres 235/75 R17.5 tyres from leading manufacturers Twin steel wheels factory silver finish # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings at front Electronic Braking System (EBS) with front EBS socket # Electrical System 24 V electrical system LED multi-chamber rear lights Yellow LED side marker lights LED number plate lighting LED front position lights LED rear outline marker lights (white/red) 2 × 7-pin and 1 × 15-pin front sockets LED rotating beacon with holder activated via parking lights Additional LED work light at rear activated via reverse gear # Floor Steel chequer plate on gooseneck Perforated steel low-loader deck with chequer plate in wheel well area Removable steel covers above wheel arches Perforated steel rear loading slope # Side Walls 400 mm aluminium side boards on the gooseneck removable approx. 2,500 mm long 400 mm removable aluminium rear board on the gooseneck # Loading Ramps Pair of aluminium loading ramps max. capacity 12,000 kg per pair approx. 3,400 × 320 mm Rear ramp storage compartment between the longitudinal beams # Registration / Marking Prepared for German registration Single-line number plate holder ECE R48 reflective contour markings (white sides red rear) |
Трал NN3J Ładowność: 26.500kg 3osie SAF Przednia Podnoszona WABCO
Трал Gourdon новий
Трал Gourdon новий VPR 350
Трал Ifor Williams новий